GPRS and MMS settings

General Instructions
Except for the card IM3, penyetingan GPRS or MMS require activation process first.
Activation process is done in a way to contact the operator of the appropriate card is used.
About making the details of the activation can be seen on the GPRS penyetingan detailed below.

Setting GPRS Matrix / manual Mentari
Profile Name: Satelindo
Homepage URL: http://wap.klub-mentari.com
IP Address: 10.19.19.19
Bearer: GPRSUser
Name: indosatPassword: indosat
APN: indosatgprs
Activate GPRS: ACTGPRS to tell 888
Call Center: (021) 5438 8888 or 222 (from mobile)

Setting GPRS SIMPATI (Telkomsel)
Using a mobile phone with GPRS facility.
Still have a minimum balance Rp. 500, - under the value you can not use GPRS services, SMS and MMS.
Register as subscribers to GPRS, which can only be done through SMS. Type the message is the SMS: GPRS [card number] Example: GPRS 6210009922069556 Send to: 6616. Note: send SMS messages Rates: Rp. 350, - / message.
Card number is the number ICCID (Integrated Circuit Card Identification) of 16 (sixteen) digit number on the back and there is a chip card SIMPATI Nusantara you.

Make communication settings on the terminal that is used with the parameters as follows:
Connection Name: Telkomsel APN
Data Bearer: GPRS
Access Point Name: Telkomsel
Username: wap
Prompt Password: No
Password: wap123
Authentication: Normal
Homepage: http://wap.telkomsel.com
WAP Gateway IP Address: 10.1.89.130
Port: 9201 (standard), 8000 (proxy)
Located in the region GPRS.Untuk services using WAP GPRS Telkomsel with, make sure you have already registered on http://www.telkomsel.com.
To use the WAP GPRS Telkomsel with, make sure you make the handset settings to use Access Point Name (APN) Telkomsel.

Setting GPRS kartuHALO (Telkomsel)
Using a mobile phone with GPRS facility.
Register as a customer GPRS, registration can be done in GraPARI or contact Caroline on 111 numbers, toll-free service from kartuHALO you, or can be made via SMS: how: Type the message SMS: GPRS Example: GPRSKirim to: 6616. Note: send SMS messages Rates: Rp. 250, - / message.

Make communication settings on the terminal that is used with the parameters as follows:
Connection Name: Telkomsel APN
Data Bearer: GPRS
Access Point Name: Telkomsel
Username: Password wapPrompt: No
Password: wap123Authentication: Normal
Homepage: http://wap.telkomsel.com
WAP Gateway IP Address: 10.1.89.130
Port: 9201 (standard), 8000 (proxy) Located in the area of the GPRS service.
To use the WAP GPRS Telkomsel with, make sure you have already registered on http://www.telkomsel.com.
To use the WAP GPRS Telkomsel with, make sure you make the handset settings to use Access Point Name (APN) Telkomsel.

Setting GPRS XL

Automatically
Send the following SMS to 9667, only Rp. 350, - (including VAT free for users and has not been included for the user Xplor).
Settings for GPRS: GPRS (space) (brand mobile phone) (space) (mobile phone)
For MMS settings: MMS (space) (brand mobile phone) (space) (mobile phone)
example: GPRS and MMS SE K600i SE K600i
Writing and the types of mobile phone brands (not case sensitive)

MERK & TYPE (select one)

NOKIA or NOK3650, 3660, 5100, 6100, 6108, 6200, 6220, 6225, 6230, 6340i, 6600, 7610, 6610, 6610i, 6650, 6800, 6810, 6820, 7200, 7210, 7250, 7600, 7650, 7700, 8910i, N-Gage, N-Gage QD, 9500

ERICSSON or SonyEricsson or SET39m, T68, T68i, T230, T300, T310, T610, T630, P800, P900, P910, Z200, Z600, K700i, K500i, S700i, K600i, K750iSIEMENS: S57, SL55, SX1, C62, S65, SL65, CX65

SAMSUNG: X100, X600, E700

To activate GPRS / MMS in the system, contact Customer Service on the XL 818 through the free / Xplor you (toll free) 021 57959818 or through the other (subject to the tariffs in accordance with applicable).

Manual

Parameter Setting GPRS:
Connection name: GPRS XL
Data bearer: GPRS
Access point name: http://www.xlgprs.net
User name: xlgprs
Prompt Password: No
Password: proXL
Authentication: Normal
Homepage: http://wap.lifeinhand.com
Connection Security: - off
Session mode: permanent
Phone IP address: Automatic
Primary name server: 0.0.0.0
Secondary name server: 0.0.0.0
WAP Gateway IP Address: 202.152.240.50
Port: 9201 (standard), 8080 (proxy)

Setting GPRS IM3

Automatically
Send SMS to 3939 with the message: GPRS [Brand HP] [HP Type]
Example: - GPRS Nokia 7650 - Ericsson T68 GPRS-GPRS SE P800

Manual

Parameter Setting GPRS:
Connection name: M3-GPRS
Access point name: http://www.indosat-m3.net
User name: gprsPassword: IM3
Authentication: Normal
Homepage: http://wap.indosat-m3.net
IP address: 010.019.019.019Port: 9201 (standard), 8080 (proxy)

Intel Processor History

Here are a few historical development of the processor and the Intel clone of its successful disarikan

* Debut Intel processor series starting with MCS4 which is the embryo of the processor's i4040. 4-bit processor is planned to be a brain calculator, in the same year (1971), Intel i440 to make revisions. Originally ordered by a Japanese company for the calculator, the processor is much more powerful than expected so that Intel's purchase rights to Japanese companies for the development and further research. Here for the development of the embryo of the processor to the computer.

* Next show 8-bit processor in the first i8008 (1972), but somewhat less preferred because multivoltage .. ago showing the new processor i8080, here there is a change in voltage that is a triple, a technology NMOS (PMOS no more), and introduce the first time the system clock generator (up additional chip), packed in the form of Array DIP 40 pins. Then also appear processor2: -1974 Motorola's MC6800, Z80 from Zilog -1976 (are the two rival weight), and another series prosessor2 artificial MOST 6500, Rockwell, Hyundai, WDC, NCR ff. Z80 full compatible with the i8008 only until the machine language level. Level rakitannya different language (not compatible level software). I8080 processor is the processor's internal registers with the 8-bit external bus 8-bit memory addressing and 20-bit (can access 1 MB total memory), and operating mode REAL.

* 77 Thn 8085 show, generatornya onprocessor clock, cikal bakalnya the use of single voltage +5 V (the implementation of s / d 486DX2, DX4 starting at +3.3 V ff).

* I8086, with the processor registers, 16-bit external data bus, 16-bit memory addressing and 20-bit. 78 yr Direlease using HMOS technology, components support 16 bit bus are very rare, so the price becomes very expensive.

* And for the market demand appear i8088 16bit internal bus, external bus 8bit. So that components can use i8088 peripherals 8bit former i8008. IBM chip select for this pebuatan IBM PC because it is cheaper than the i8086. If only the CEO of IBM PC that does not express mere side only dream, of course, IBM will take the total PC market at this time. IBM PC first release in August 1981 has 3 versions of IBM PC, IBM PC-Jr and IBM PC-XT (extended technology). I8088 chip is very popular, until the NEC has launched a chip that is built on the pin chip specification, which is named V20 and V30. NEC V20 and V30 is compatible with the processor to Intel assembly level language (software).

Save Web Page In PDF Form

If you include people who like to save an article or web page to read offline and then you can try the service HTML to PDF Converter. This is a free service to convert your html files (web pages) to pdf files.

To use this service you can simply enter the URL of the web page to be converted. Then click the Make PDF. If the conversion process is complete you can immediately download the PDF file.

Free Rapidshare Auto Downloader

Rapidshare Auto Downloader is a free software that can be used to ease you in to download many files from Rapidshare.

Rapidshare Auto Downloader has a feature that is quite interesting, namely:

* Download a group of links from rapidshare
* Download incomplete downloads until all links are downloaded
* Autoshutdown feature
* Load and save the download list
* Check for new versions automatically

To use this software is quite easy. You simply write or mem-paste the URL of the list will be downloaded on the Links field. Then click the Add Link (s). To start the download click Start Download.

By default the downloaded file will be saved in C: \. To change, click the Settings menu - Save to File.

To keep in mind, this software only as a download manager only, so will not be mem-bypass pause time between downloads.

You can download Rapidshare Auto Downloader here. So that this software can run with lancara then your computer must be installed. NET Framework first.

Safe Mode, benefits and usage

For most we (computer users) may not be a foreign term to the Safe Mode. This feature is available in the Windows operating system, for different purposes. For example, to check or repair damage to the windows system, remove virus, examine the damage and the other driver.

How to enable Safe Mode and what you can when we are already entering Safe Mode?

What is Safe Mode?

Safe mode option is the choice of start-up windows that its main function to handle if there is a problem with the system. Windows will run with the minimal condition, only the files and drivers that are important in the switch, including any additional software, most software is not activated. Then when it is signed in safe mode, it will appear any posts "Safe Mode" at the top of the corner windows.

How to Log In Safe Mode

One way that can be used in almost all windows systems including Windows Vista is by pressing the F8 key when booting windows are (or when the computer starts up and show information Memory / hardware). After that will appear several menu options booting the computer, as follows:

Some explanation of Advande Options Menu

In addition to the menu to select Safe mode, there are many other menus that can be selected. Here are some explanation of the menu-the menu:

* Safe Mode, this option means that Windows will run only the minimum files and drivers, including software-software.
* Safe Mode with Networking, this option such as safe mode with the drivers so that we can utilize Network (Networking)
* Safe Mode with Command Prompt, the same as safe mode only program Command Prompt / MS-DOS Prompt (cmd.exe) will be activated immediately (not explorer)
* Enable Boot Logging, windows will create a file Ntbtlog.txt, when start-up and start-up information will be stored in the file. This file is usually stored in the root system, for example, drive C:
* Enable VGA Mode. Windows will be running with a minimum display modes such as 640 or 800 × 480 × 600. Usually used to check for damage or error [driver] VGA (graphic display windows).
* Last Known Good Configuration, running windows registry using the information that was saved when the last shutdown. Use one if we change the system configuration, or when the windows failed to enter the main display.

Some of the benefits of the Safe Mode

* Uninstall the software before the computer hangs, error and so forth. Sometimes after a certain program installed in the windows problem, so if you can not uninstall in normal mode through the use Safe Mode.
* Disabling of a particular program or application. To facilitate the entry into Safe Mode, can use the Autoruns application that can be obtained free from SysInternals. This technique can also be used to check the computer loading slow. If no Autoruns, can type in msconfig in the Run menu, to run the System Configuration Utility, if it has been selected to appear through the Startup tab.
* Checking the problems with the graphics display windows (VGA). When the display windows problem, can check in by selecting the "Enable VGA Mode", if successful, and do not see the problems, potential problems in the VGA driver.
* Delete the file / virus that can not be through the normal mode. Some antivirus can still run in safe mode, and tried to scan through safe mode. Sometimes the virus is not running in safe mode, although you can also walk / atif although in Safe Mode.
* Running System Restore if previously activated, so that the condition of the system can be restored to previous conditions.
* Running various features of the Control Panel, Administrative tools, and so forth.
* Open the Registry Editor, either to check or to edit some of the contents.

Safe Mode is a standard feature of Windows and sometimes quite useful for some problems such as over, although sometimes such as viruses can also be active in this mode, so use the safe mode is not enough.